Innovative Embedded Networking : Device Server, WiFi, Ethernet

Home >

WizFi210

Product Detail
Download

WizFi210 – Ultra Low Power “Serial to WiFi” Module

- Bring WiFi connectivity via Serial Host Interface
- Quick Booting Time : under 20msec
- Ultra Low Power through Dynamic Power Management (34µA at the Standby mode)
- Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b)
- Security Protocol : WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- Operation Temperature : -40℃ ~ 85℃
- Compact Size : 32 x 23.5 x 2.9 (mm)
- CE, FCC, KCC Certified
- Supports the module with chip antenna

Specification

Specifications	Description
Radio Protocol	IEEE 802.11b/g/n Compatible
Supported Data Rates	11, 5.5, 2, 1 Mbps (IEEE 802.11b)
Modulation	DSSS and CCK
RF Operating Frequency	2.4 - 2.497 GHz
Antenna Options	Chip antenna and U.FL connector for external antenna
Networking Protocols	UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
Power Consumption (Typical)	Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
RF Output Power (Typical)	8dBm ± 1dBm
Security Protocols	WEP, WPA/WPA2–PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**)
I/O Interface	UART, SPI(*), I2C(), WAKE, ALARM, GPIOs
Power Source	3.3V
Dimensions	32 x 23.5 x 3 mm

(*) is supported by software customizing
(**) is supported by dedicated firmware

Total : 11


TITLE	LANGUAGE	URL COPY
WizFi210/220 QuickStartGuide(EN) V1.0	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WizFi210-QuickStartGuide_EN_V1.0.pdf
This Quick Start guide will help you to get started using WizFi210/220. This document show how to configure and test the module, simply. Further informations are in the manual of the mddule. 03/31/2011 V1.0 Official Release
WizFi210/220 Reference Schematic	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/sch_wizfi2x0_base.pdf
WizFi210/220 Reference Schematic
WizFi210/220 User Manual(EN) V1.11	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WizFi210-User_Manual_EN_V1.11.pdf
The WizFi family of fully certified modules offers a quick, easy, and cost effective way for device and appliance manufacturers to add Wi-Fi capabilities to their products. This manual contains information, specifications, operating instructions and technical data of the module. <01/11/2012 V1.11> Added UART baud rate(460800, 921600) Added EXT_RESET description Added FAQ Added AT+DHCPSRVR Command Added Product contents <09/05/2011 V1.10> Changed Evaluation Board Changed GPIO number(HW Trigger, Button) Changed AT+XEHT Command Added Limited AP Feature <05/24/2011 V1.01> Changed Power Consumption and RF Output Power Added Auto Reconnect AT Command(AT+XAR) Added Certification Information <03/31/2011 V1.0> Official Release
WizFi210/220 Application notes - Part 1	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/AP_Notes(Part_1).zip
This file include the following documents. (AP310)WIZSmartScript-Description_EN_V1.0.pdf (AP320)WIZSmartScript-Firmware Upgrade_EN_V1.01.pdf (AP330)WizFi Range Test_EN_V1.0.pdf (AP350)HTTP Data Transfer.pdf (AP360)Limited AP Test.pdf (AP370)Using New Firmware version in Old EVB Type.pdf (AP380)Data handling using Esc Sequences.pdf (AP390)WiFi Infrastructure(Limited AP, WiFi Station).pdf (AP400)Multi Connections.pdf
WizFi210/220 Application notes - Part 2	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/AP_Notes(Part_2).zip
This file include the following documents. (AP340)Antenna Type Description.pdf (AP410)SPI-to-WiFi Guide.pdf (AP420)Easy Provisioning via WiFi.pdf (AP430)Reset WizFi210.pdf
WIZSmartScript including firmware 1.1.0.0(W)	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WIZSmartScript[0][0].zip
The WIZSmartScript program demonstrate how to use the <WizFi210 AT Command>. Because the scripts is the text file, so user can modify(or add) the script files.
WIZSmartScript including firmware 1.1.0.5(W)	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WIZSmartScript(1.1.0.5(W)).zip
The WIZSmartScript program demonstrate how to use the <WizFi210 AT Command>. Because the scripts is the text file, so user can modify(or add) the script files. And you can upgrade WizFi210/220 to version1.1.0.5(W) with this file.
WizFi210/220 Configuration Tool	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/Config-Tool.zip
The attached file is the configuration tool of WizFi210/220.
WizFi210/220 HW design guide	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/HW-Design-Guide.zip
This file include the following documents. Design Guide_WizFi210.pdf WizFi2x0-EVB_Part location.pdf WizFi2x0-EVB_Schematic.pdf WizFi2x0-Interface-Board_Gerber.zip
WizFi210/220 1.1.0.3(E) firmware (supporting WPA-EAP)	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WizFi2x0-1.1.0.3(E).zip
This firmware support EAP feature(AT+WEAPCONF command). The version of this firmware is 1.1.0.3(E). ('E' means the enterprise version.) Note that this enterprise firmware doesn't support some features, such as WEB Server. 1. Download WIZSmartScript program. http://wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=480&page=1&cate1=5&cate2=43&cate3=0&pid=1137&cType=2 2. Overwrite the firmware files with this attached files. Upgrade the WizFi210/220 with this firmware according to the below AP note. (AP320)WIZSmartScript-Firmware Upgrade_EN_V1.01.pdf http://wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=479&page=1&cate1=5&cate2=43&cate3=0&pid=1137&cType=2 3. Check the version of WizFi210/220 with ATI2 command, and you can use the AT command about EAP. ATI2 WizFi210 1.1.0.3(E) [OK] AT+WEAPCONF=25,26,user,password [OK]
WizFi210/220 1.1.0.3(SPI) firmware and SPI master sample sources	English	http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/WizFi210_SPI_materials.zip
This firmware support SPI feature(SPI-to-WiFi). The version of this firmware is 1.1.0.3(SPI). 1. Download WIZSmartScript program. http://wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=480&page=1&cate1=5&cate2=43&cate3=0&pid=1137&cType=2 2. Overwrite the firmware files with this attached files(WizFi210-SPI-Firmware.zip). Upgrade the WizFi210/220 with this firmware according to the below AP note. (AP320)WIZSmartScript-Firmware Upgrade_EN_V1.01.pdf http://wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=479&page=1&cate1=5&cate2=43&cate3=0&pid=1137&cType=2 3. With this firmware, you can test the <SPI-to-WiFi> feature. 4. Refer to the attatched SPI master sources(WizFi210_SPI_Master_Sample_Source.zip) and below AP note. (AP410)SPI-to-WiFi Guide.pdf http://wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=492&page=1&cate1=5&cate2=43&cate3=0&pid=1137&cType=2